fluid region meaning in Chinese
流体区域
Examples
- Under the assumptions of linearized potential flow , the coupled problem of flow in the interior and exterior fluid regions is solved by an eingenfunction - expansion approach
在线性有势流的假定下，用特征函数展开方法求出了内部和外部流场的解。 - Several ways of coupling of solid - fluid regions , including that vacant proportion practice , segregated volume practice etc , are discussed , and the brief treatment method of solid - region in the fluid is put forward
讨论并比较了几种固体一流体耦合求解的办法：空度法、隔离容积法等，简化流场中固体障碍物的处理。 - Conjugate heat transfer calculation was carried out , with simple algorithm , studied up on boundary condition and modified pressure adapting algorithm , to give prediction on velocity field inside the disk cavity , the whole temperature field including fluid region and solid region , and heat transfer coefficient at fluid - solid interface . the simulation results indicate , ( 1 ) in rotor - stator disc cavity , the secondary flows near rotating disc stronger than which near state disc , keeps temperature of rotating disc lower than state disc ' s
为了使计算方法得到更多的算例验证，本次研究做了若干算例，文中选出其中四个算例进行分析，计算结果表明： ( 1 )在转静盘腔结构中，转盘表面的二次流大部分区域都比静盘表面的要强，所以转盘表面换热情况较好，转盘的总体温度水平要低于静盘。 - The computational region was composed of fluid region enclosed by stator and rotator disks , as well as inner and outer shrouds , and solid region , that is rotator disk . the main research work and results are the following : 1 ) numerical study was conducted for the flow problem inside a typical rotator - stator cavities with different turbulent models including 1 - equation model and high k - model rng k - model
论文主要工作和结果如下： ( 1 )针对典型的转-静盘腔模型进行数值研究，通过对单方程模型、高k -模型和rngk -模型获得的计算结果进行比较以及与相关试验数据验证，结果表明， rngk -模型较高k -模型和单方程模型更能准确地模拟转静盘腔的流动。